Parts

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop disc brake pads designed for use with Shimano disc brakes. - Features a copper plated backing plate and sintered pad compound for extreme conditions like down hill - Compatible with Shimano direct mount BR-RS505/805, Dura Ace BR-R9170, Ultegra BR-R8070/BR-R7070, GRX BR-RX810/BR-RX400, Metrea BR-U5000, XTR M9100, and Tiagra 4770

Kool-Stop Ebike Compound Disc Brake Pads - Features a ceramic layered steel back plate and organic pad compound - Fits Shimano Saint BR-M810/820/8100/9120, BR-MT520/420, ZEE BR-M640 - Also compatible with Tektro Quadiem/Slate/G-Spec/Zurich and TRP G-Spec DH/DHR, Bengal Helix 4X

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams

- Stretch-proof, super-narrow chain for use with 10-speed Campagnolo/Shimano/SRAM - Use: Mountain/Road - Size: 11/128-inch - Width: 5.9mm - Weight: 273 grams - 116 links

KMC, X11 GY/GY, Chain, Speed: 11, 5.5mm, Links: 118, Grey

- 1/2" x 11/128" - 116 Links - EPT anti-rust coating - 11-speed - Compatible with Shimano, SRAM & Campagnolo 11-Speed Systems - Mushroomed Pin Riveted

Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

- X9SL: superlight chain for use with 9-speed, 252g - X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed - Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation - Width = 11/128-inch

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.

With more disc brake platforms on the market than ever before, fitting hydraulic hoses can be complex and frustrating. That’s why we developed the Quick-Fit Hydraulic Hose adapter system, a foolproof approach utilizing proven caliper-adapter technology from the motorcycle world. Pro universal hoses makes it safe and easy to dial in a perfect fit. Simply select a Pro hydraulic hose and match it with a compatible Mountain Pro Quick-Fit adapter kit. It’s that easy. Pro Hydraulic Hoses come in a wide array of colors. Pro Quick-Fit adapter kits are available separately in convenient packaging for the most popular brake manufacturers and models. - A Kevlar weave surrounding the liner prevents bulges due to heat buildup and extreme pressure - Each hose has 2 caliper-side universal couplers that connect to the Quick-Fit Adapters (sold separately) - Mountain Pro hydraulic hose kits are available in 12 colors and finishes - Black kits contain gloss black housing with silver logos; Stealth Black kits have matte black housing featuring black logos

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.